3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual Optimizing a Network Plan

476CHAPTER 18: OPTIMIZING A NETWORK PLAN

5You can choose to import measurements from the network, a site survey file, or both:

a If you want to use RF neighborhood information imported from a MAP in the network, click Yes next to Network.

b If you want to import measurements from a site survey file, click Yes next to File, and in the File Format listbox, select Ekahau. Then click Choose to navigate to the csv file that contains the RF measurement data.

6In the Map Name field, specify the map name.

The map name must match the name specified in the site survey work order, and must be the same map name used in the site survey tool.

7Click Next.

The import progress is displayed. When the import is done, check the Total valid RF measurements found line in the progress messages.

„If the number is greater than 0, 3WXM successfully imported measurements.

„If the number is 0, no measurements were imported. Try the import again and verify that the map name is correct.