3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Configure logging to the console

Viewing and Setting Log and Trace Settings 199

„Critical—You must resolve the critical condition. If you do not resolve the condition, the WX can reboot or shut down.

„Error—The WX is missing data or unable to form a connection.

„Warning—A possible problem exists.

„Notice—Events that can cause system problems have occurred. These are logged for diagnostic purposes.

„Info—Informational messages only. No problems exist.

„Debug—Output from debugging.

The default severity level is Error.

The debug level produces a lot of messages, many of which can appear to be somewhat cryptic. Debug messages are used primarily by 3Com for troubleshooting and are not intended for administrator use.

3Configure logging to the console:

a To specify that logging messages be sent to the console, select Enabled. Clear Enabled to disable the logging of messages to the console.

bIn the Severity Filter list, select the lowest level of severity of the event or condition to be logged (see the list in step 2).

The default severity level is Error.

4Configure logging to the current login session:

a To specify that logging messages be sent to the current login session, select Enabled. Clear Enabled to disable the logging of messages sent to the current login session.

bIn the Severity Filter list, select the lowest level of severity of the event or condition to be logged (see the list in step 2).

The default severity level is Info.

5Configure trace logging:

a To enable trace logging, select Enabled. Clear Enabled to disable trace logging.

bIn the Severity Filter list, select the lowest level of severity of the event or condition to be logged (see the list in step 2).

The default severity level is Debug.

cIn the Maximum Size box, specify the maximum size for the trace log (1 to 50 MB). The default is 1 MB.

6To create an external log server, go to “Creating an External Log Server”. Otherwise, click Save.