3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A manual AP Icon to its Floor, Location, Place tab

	Placing Third-Party Access Points 131
Moving a Third-Party	If you added a third-party access point while using the Configuration or
AP Icon to its Floor	Rogue Detection tool bar options, the access point is on the Objects to
Location	Place tab.

1In RF Planning, navigate to the floor plan.

2In the Organizer panel, click Objects to Place.

3Select the icon or description of the AP.

4On the floor plan, click on the location where you want to place the AP.

You must click in a coverage area.

3WXM removes the AP from the Objects to Place list and places an icon for it on the floor plan.

Creating and Placing

an Icon for a

Third-Party Access

Point

1In RF Planning, navigate to the floor plan.

2In the Task List panel, click Tools.

3In the Coverage Area task group, under Wiring Closet/Misc, click the (Insert Third-Party AP) icon

4On the floor plan, click where you want the third-party access point to be placed. The Create Third-Party AP wizard appears.