3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual To create RF obstacles by grouping objects

96CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM

To create RF obstacles by grouping objects

You can group several objects in a drawing to specify them as one RF obstacle. For example, if a wall consists of several lines, the lines can be grouped. If you subsequently ungroup the objects, the RF obstacle information is removed.

1Select an object on the floor.

2Press Shift while clicking additional objects.

3Click the (group objects) icon on the toolbar. The grouped objects now appear as one object group.

4Right-click, and select Create RF Obstacle. The Create RF Obstacle dialog box appears. See “To use the Create RF Obstacle Dialog box”.

To use the Create RF Obstacle Dialog box

The Create RF Obstacle dialog box is shown in Figure 4.

Figure 4 Create RF Obstacle Dialog Box

1In the Description box, type a description for the RF obstacle (1 to 60 characters, with no tabs).

2In the Obstacle Type list, select the material of which the RF obstacle is made.

Select Other if the material is not listed. This allows you to create your own obstacle type.