3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Click WX Associations, Configuration File

Adding a WX Switch to the Network Plan 163

9To modify the management interface, select the IP interface and VLAN from the VLAN/IP drop-down list.

10To modify the enable password, edit the string in the Enable Password box.

Use this option when you are creating a new switch in 3WXM. This option modifies the password in the network plan. However, if the switch is already deployed in the network, 3WXM cannot apply configuration changes to the switch unless the enable password in 3WXM matches the enable password already configured on the switch.

11Click WX Associations.

12To change the switch’s Mobility Domain membership, select the Mobility Domain from the Mobility Domain drop-down list.

To leave the switch out of all Mobility Domains, select Not Assigned.

13To change the switch’s wiring closet membership, select the closet from the Wiring Closet drop-down list.

To leave the switch out of all wiring closets, select Not Assigned.

14Click OK to save the changes and close the wizard.

15Edit other parameters as required. (See the rest of this chapter and the following two chapters.)

Adding a Switch by If you have already deployed a WX switch in the network and you want Uploading its to add the switch to the network plan, you can upload the switch’s Configuration from configuration into 3WXM, edit the switch, then redeploy the switch with

the Network the new parameters. (See “Uploading a WX Switch into the Network Plan” on page 66.)

Adding a Switch by You can add a switch to the network plan by importing a switch Importing a configuration file. The configuration is imported in XML format.

Configuration File

1Use the procedure in “Importing and Exporting Switch Configuration Files” on page 359 to import the switch’s configuration file.

2In the Organizer panel, click the plus sign next to the new WX switch to expand the configuration options.

3Select a configuration option, then use the instructions in this chapter or one of the following chapters to modify the configuration information:

„Chapter 7, “Configuring Wireless Parameters” on page 235

„Chapter 8, “Configuring Authentication, Authorization, and Accounting Parameters” on page 287