3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Task List panel, select MAC User Group

292CHAPTER 8: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

Creating a MAC User To create a MAC user group and assign users to it:

Group and Assigning

Users To It

1Access the Create MAC User Group wizard: a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to AAA.

d Select Local User Database.

e In the Task List panel, select MAC User Group.

2In the User Group Name box, type a name for the MAC address user group (1 to 60 alphanumeric characters, with no spaces or tabs).

3To set authorization attributes for MAC addresses in the group, click Next and go to step 5.

4Otherwise, if you plan to set authorization attributes in another way, such as configuring default AAA attribute values for the SSID the user will access, click Finish.

5In the VLAN Name box, select or type the VLAN that the group belongs to (1 to 16 alphanumeric characters, with no spaces or tabs). The WX switch will authorize the MAC users in this group for that VLAN. For more information on VLANs, see “Viewing and Configuring VLANs” on page 206.

6In the attribute row you want to configure, click the Attribute Value column.

See Table 22 on page 293 for a description of user attributes and their values.

7Type the new attribute value in lowercase characters. ACL names are case-sensitive.

8Repeat step 5 through step 7 for each attribute value you want to change.

9To add MAC addresses to the group, click Next.

10Select users in the Available MAC Address Users list.

11Click Add to move them to the Current MAC Address Users list.

12Click Finish.