3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A To create RF obstacles for all objects in a layer

Specifying the RF Characteristics of a Floor 95

Converting Objects into RF Obstacles

You have several options when creating RF obstacles:

„Convert all objects in a layer of a CAD drawing into RF obstacles.

„Convert all objects in an area of the drawing into RF obstacles.

„Convert multiple objects in the drawing into RF obstacles.

„Convert grouped objects in the drawing into RF obstacles.

To create RF obstacles for all objects in a layer

3WXM preserves the layers defined in a CAD drawing. You can convert all of the objects in the layer into a specific type of RF obstacle.

1Click Layers in the Organizer panel to bring up a list of the layers in the drawing.

2Right-click the list of layers in the Organizer panel.

3Select Create RF Obstacles from the menu that is displayed. The Create RF Obstacle dialog box appears.

4Go to “To use the Create RF Obstacle Dialog box” on page 96.

To create RF obstacles for an area in a drawing

1Diagonally drag the cursor over the area where you want to create RF obstacles.

2Right-click, and select Create RF Obstacle. The Create RF Obstacle dialog box appears.

3Go to “To use the Create RF Obstacle Dialog box” on page 96.

To create RF obstacles for multiple selected objects in a drawing

1Click an object on the floor.

2Press Shift while clicking on additional objects.

3Right-click, and select Create RF Obstacle. The Create RF Obstacle dialog box appears.

4Go to “To use the Create RF Obstacle Dialog box” on page 96.