3Com 3CRWXR10095A, 3CRWX120695A WXR100, WX4400 3CRWX440095A WX1200 manual Changes

11	VERIFYING CONFIGURATION
	CHANGES

3WXM uses a set of rules to verify WX switch configurations. Changes to a switch’s configuration in 3WXM or in the live network are automatically evaluated by comparing the changes to the rules. If the evaluation detects any error or warning conditions, the information in the Alerts panel is updated:

„Errors or warnings in a switch’s configuration in 3WXM affect the Configuration counts.

„Errors or warnings in the network affect the Network counts.

Verification Tabs Click on Configuration or Network in the Alerts panel to display the Verification tabs in the Content panel.

The Verification tab contains a Config Verification tab and a Network

Verification tab:

„The Config Verification tab shows errors and warnings for switch configuration information in 3WXM.

„The Network Verification tab shows errors and warnings for configuration information in the network. The errors and warnings can be for switch configuration items and for the monitoring service.

On each tab, the Message column lists error descriptions in red and lists warning descriptions in orange:

„Errors are serious problems that must be addressed before deployment. By default, you cannot deploy a network plan with errors in it. After fixing errors, verify the network plan again to ensure that the errors have been resolved.

„Warnings are noncritical issues that do not stop deployment. Review any warnings and consider resolving the issues before deployment.