Modifying Configuration Change Polling Options 361
Modifying Configuration Change Polling Options
By default, 3WXM client polls WX switches in the network every 15
minutes for network changes, and displays a popup message if changes
are detected. The popup message is in addition to notification in the
Alerts panel.
To modify configuration polling options
1Select the Devices tool bar option.
2Click Options on the Devices tab’s toolbar. The Managed Device Options
dialog box appears.
3To enable the detection of configuration changes in the network, make
sure Enabled is selected next to Poll for configuration changes.
4To specify how often network checks occur, specify the interval between
checks, from 1 to 1440 minutes (24 hours), in the Interval box. The
default is 15 minutes.
5To be notified of network changes by a popup message, select Prompt
when network changes are detected.
To disable the popup message, deselect the option.
Disabling the popup message does not affect the Network Changes
information in the Alerts panel. The Alerts panel still notifies you of
network changes.
6To instruct WX switches to save deployed configuration changes in their
configuration files, select Save WX Configuration on Deploy.
7Click Close.