154 CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM
Table15 shows the information available in the RF measurement table.

Table15 RF Measurement Information

Item Value
X Distance in the X direction from the 0,0 coordinate (the
upper left corner of the panel).
Y Distance in the Y direction from the 0,0 coordinate (the
upper left corner of the panel).
Show Unreachable APs Show MAPs that are too far away to accurately measure
signal strength.
Show Disabled APs Show all disabled MAPs.
Show APs on Other
Floors
Show the MAPs located on other floors that can be
detected from this RF measurement point.
MAP/AP MAP or third-party access points detected.
Distance Distance between MAP and RF measurement point.
Channel Channel of the MAP or third-party access point.
RSSI (dBm) Signal strength from the MAP at the RF measurement
point.
Status Whether the MAP is active (OK) or disabled.