3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Service-type, Session-timeout, Ssid

Creating and Managing Users in the Local User Database 295

Table 22 Authentication Attributes for Local Users (continued)

Attribute	Description	Valid Value(s)
service-type	Type of access the user	Access type, which can be one of the
	is requesting.	following:
		„ 2—Framed; for network user access
		„	6—Administrative; for
			administrative access, with
			authorization to access the enabled
			(configuration) mode. The user
			must enter the enable command
			and the correct enable password to
			access the enabled mode.
		„	7—NAS-Prompt; for
			administrative access to the
			nonenabled mode only. In this
			mode, the user can still enter the
			enable command and the correct
			enable password to access the
			enabled mode.
		For administrative sessions, the WX
		switch always sends 6 (Administrative).
		The RADIUS server can reply with one
		of the values listed above.
		If the service-type is not set on the
		RADIUS server, administrative users
		receive NAS-Prompt access, and
		network users receive Framed access.
		Note: MSS will quietly accept
		Callback Framed but you cannot
		select this access type in MSS.
session-timeout	Maximum number of	Number between 0 and
(network access	seconds for the user’s	4,294,967,296 seconds
	session.	(approximately 136.2 years).
mode only)
ssid	SSID the user is allowed	Name of the SSID you want the user
(network access	to access after	to use. The SSID must be configured
	authentication.	in a service profile, and the service
mode only)
		profile must be used by a radio

profile assigned to 3Com radios in the Mobility Domain.