3Com 3CRWX120695A WXR100, 3CRWXR10095A Have been collected and will be transmitted to the new

424CHAPTER 16: MONITORING THE NETWORK

Table 43 Activity Details for Authorization Successful (continued)

Column	Description
Auth Protocol Type	802.1X protocol used to authenticate the client:
	„	EAP-TLS
	„	MD5
	„	NONE
	„	PASS-THROUGH
	„	PEAP
Client Location	Mobility Domain, WX switch, MAP, and radio that were
	dealing with the client.
Session ID	ID used by 3Com equipment to track the session within the
	Mobility Domain.
Client IP Address	IP address of the client.
Session State	State of the user session:
	„ Associated — User is authenticated using an 802.11
		protocol and associated with a MAP.
	„ Authorizing — User is authenticated and is starting the
		AAA authorization process.
	„ Authorized — User is authorized.
	„ Active — User’s session is fully active.
	„ Deassociated — User is disassociated from the MAP.
	„ Roaming_away — User is roaming (a connection in the
		new location is established).
	„ Updated_to_roam — User is roaming. Session statistics
		have been collected and will be transmitted to the new
		location.
	„ Web_authing — User is being authenticated by
		WebAAA.
	„ Wired — User is being authenticated using an 802.11
		protocol on a wired authentication port.
	„ Clearing — User session is being terminated.
	„ Invalid — Usually indicates the session is being
		terminated, and session information is no longer available.
Auth Server IP	System IP address of the WX switch that was attempting to
	authenticate the client.
	Note — The system IP address is listed even if the switch was
	using a RADIUS server to authenticate the client.
SSID	SSID the client was requesting.