3Com 3CRWXR10095A, 3CRWX120695A WXR100 Select RF Detection Select Enable AP Signature, Click Save

Viewing and Changing RF Detection Settings 285

A rogue is a device that is in the 3Com network but does not belong there. An interfering device is not part of the 3Com network but also is not a rogue. MSS classifies a device as an interfering device if no client connected to the device has been detected communicating with any network entity listed in the forwarding database (FDB) of any WX switch in the Mobility Domain. Although the interfering device is not connected to your network, the device might be causing RF interference with MAP radios.

„Rogue—Radios use countermeasures against devices classified by MSS as rogues, but do not use countermeasures against devices classified by MSS as interfering devices.

Countermeasures affect wireless service on a radio. When a MAP radio is sending countermeasures, the radio is disabled for use by network traffic, until the radio finishes sending the countermeasures.

„Configured—Configures radios to attack only devices specified in the attack list on the switch (on-demandcountermeasures). When this option is used, devices found to be rogues by other means, such as policy violations or by determining that the device is providing connectivity to the wired network, are not attacked.

3Click Save.

To view or change other radio profile options, select the radio profile and click Properties.

Enabling MAP A MAP signature is a set of bits in a management frame sent by a MAP Signatures that identifies that MAP to MSS. If someone attempts to spoof

management packets from a 3Com MAP, MSS can detect the spoof attempt.

1Access the RF detection settings:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to Wireless.

d Select RF Detection.

2Select Enable AP Signature.

3Click Save.