350 CHAPTER 10: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
Toolbar Options Table25 lists the options on the Devices tab’s toolbar.
Synchronizing Local and Network Changes
Whenever configuration changes occur to a switch, 3WXM alerts you
that changes have occurred. If a configuration change occurs on a switch
in the network or in the network plan, so that the network and network
plan are out of sync, 3WXM displays a message in a popup window to
alert you that a change has occurred.
The Devices tab enables you to review changes and synchronize the
switches in the network with their counterparts in 3WXM by either
copying the changes to the other switch, or removing the changes from
the switch that was changed.
A row of information is displayed for each switch. The Local Status and
Network Status columns indicate where changes have occurred.
Reviewing Switch
Configuration
Changes
To review switch configuration changes:
1Select the Devices tool bar option.
2At the bottom of the Task List panel, select Change Management.
3Select one or more WX switches.
To select multiple switches, press Shift (for contiguous switches) or
Control (for noncontiguous switches) while clicking.
4In the Local Changes or Network Changes group in the Task List panel,
select Review.
Table25 Toolbar Options on Devices Tab
Option Description
Upload WX Opens the Upload Wireless Switch dialog box, which lets you add
a new switch to the network plan by copying the configuration
from a switch already running in the network.
(See “Adding a Switch by Uploading its Configuration from the
Network” on page 163.)
Options Opens the Managed Devices Options dialog box, which lets you
modify parameters used to poll switches for configuration
changes.
(See “Modifying Configuration Change Polling Options” on
page 361.)