3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual To configure a directly connected MAP

276CHAPTER 7: CONFIGURING WIRELESS PARAMETERS

To configure a directly connected MAP

1Access the Create Direct-Connect AP wizard: a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to Wireless.

d Select Access Points.

2In the Task List panel, select Direct-Connect AP.

3Select the WX port the MAP will be connected to from the Available Ports drop-down list.

Configuring a directly connected MAP in a port converts the port to a MAP access port. If the port is a statically configured member of a VLAN, the port is removed from the VLAN.

4Click Next.

5Select the MAP model from the MAP Model list.

6To select the radio type for a single-radio model, click the MAP Radio Type box and select the radio type from the list:

„11a—802.11a

„11b—802.11b only

„11g—802.11b/g

7Click Next.

The non-editable number (1 or 2) indicates the radio number on the MAP.

8To select the radio type for a single-radio model, click the MAP Radio Type box and select the radio type from the list:

„11a—802.11a

„11b—802.11b only

„11g—802.11b/g

9Click Next.

10Configure the radios:

a To enable the radio, select Enabled.

b In the Radio Profile list, select the profile to which the radio belongs. (For more information, see “Viewing and Configuring Radio Profiles” on page 263.)