3Com 3CRWX120695A WXR100, 3CRWXR10095A manual Viewing and Changing the Auto-DAP Profile

Viewing and Changing the Auto-DAP Profile 271

6In the Enable Firmware Update list, select Yes to automatically upgrade MAP boot firmware. The upgrade version of the firmware is loaded from a WX when the MAP is booting.

Select No to disable automatic firmware upgrading. Automatic firmware upgrading is enabled by default.

7To enable an individual radio, select Enabled.

8To configure RF Auto-Tuning on a radio:

a To change the maximum default power level that RF Auto-Tuning can assign to the radio, select the power level from the drop-down list in the Max Tuned Power column.

The Default power level is the same as the maximum power level allowed for the country of operation.

bTo change the minimum transmit data rate for 802.11b/g clients or 802.11a clients associated with the radio, select the rate from the drop-down list in the Client Data Rate column.

By default, a radio does not lower the transmit data rate for any client below the following values:

„5.5 Mbps for 802.11b/g clients

„24 Mbps for 802.11a clients

cTo change the maximum percentage of client retransmissions a radio can experience before RF Auto-Tuning considers changing the channel on the radio, select the percentage from the drop-down list in the Max Retransmissions column.

By default, the maximum percentage of client retransmissions a radio can experience before RF Auto-Tuning considers changing the channel on the radio is 10 percent.

9To change the radio profile used to manage the radios, select the profile from the drop-down list in the Radio Profile column.

10Click Save.