Using the Client Monitor View 423
Authorization Failure
Cause
Reason the authorization failure trap was generated:
acl-mismatch
crypto-type-mismatch
end_date_mismatch
location-policy
mobility-profile-mismatch
other
ssid-mismatch
start_date_mismatch
timeofday-mismatch
user-param
vlan-tunnel-failure
Client Location Mobility Domain, WX switch, MAP, and radio that were
dealing with the client.
Session ID ID used by 3Com equipment to track the session within
the Mobility Domain.
Auth Server IP System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID SSID the client was requesting.
User Parameters User attributes, if set to values other than null.
Failure Cause
Description
Cause of the failure.
Table43 Activity Details for Authorization Successful
Column Description
User Name Username of the client.
MAC Address MAC address of the client.
Client VLAN Name VLAN to which the client was assigned.
Session Start Time System date and time on the WX switch when the client’s
session began.
Table42 Activity Details for Authorization Failure (continued)
Column Description