Placing Installed and Auto-Configured MAPs 135
Placing Installed and Auto-Configured MAPs
You can place MAPs that are already installed on the floor into the
network plan. To do this, you upload the MAP configuration into 3WXM,
associate the MAP with a coverage area, then place them on the floor
plan.
In addition, MAPs that receive their configuration using a profile are
automatically added to the network plan. They appear under Objects to
Place in the Organizer panel. From the Objects to Place panel, you can
place these MAPs onto the floor plan.
To place installed MAPs on the floor plan:
1Select the Verification option in the main 3WXM tool bar, click the
Network Verification tab, and upload the MAP configuration into 3WXM.
(See “Verifying Configuration Changes” on page 363.)
2Select the RF Planning option in the main 3WXM tool bar and display the
floor plan in the Content panel.
3In the Coverage Areas section, right-click on the coverage area for which
the MAP is providing coverage, and select Edit Properties. The Coverage
Area Properties dialog appears.
4Click the Associations tab.
5Select the MAP in the Available Access Points group box and click the
Add button to move the MAP to the Current Access Points group box.
6Click OK to save the changes and close the dialog box.
7Click on Objects to Place in the Organizer panel.
8Click on the MAP icon, then click on the location where you installed the
MAP. The MAP icon moves from the Objects To Place panel to its location
on the floor.