3Com 3CRWXR10095A, 3CRWX120695A WXR100 Creating or, Modifying a Site, To create or modify a site

72CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM

Table 12 Toolbar icons available in RF Planning Tools (continued)

Option Description

View or change dimensions.

Place an RF measurement point.

Show 802.11a RF coverage in the floor display area.

Show 802.11b RF coverage in the floor display area.

Show 802.11g RF coverage in the floor display area.

Hide display of 802.11 RF coverage in the floor display area.

Creating or	A site is a folder that contains the buildings in the network plan. A site
Modifying a Site	usually represents a campus of geographically colocated buildings. If your
	network plan encompasses multiple campuses, create a site for each
	campus.
	To create or modify a site
	1 Select the RF Planning tool bar option.
	2 In the Organizer panel, click the name of the network plan.
	3 Do one of the following:
	„ If you are creating a new site, click on the network plan name in
	the Organizer panel and select Create Site in the Task List panel.
	A series of dialog boxes prompts you for information about the
	new site.
	„ If you are modifying an existing site, click on the plus sign next to
	the network plan to expand it, then click on the name of the site
	you want to modify. Information about the site appears in the
	Content panel.
	The following figure illustrates the information displayed in the Content
	panel for a site. Note that this information is the same as the information
	for which you are prompted when you create a site.