3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual Viewing and Changing Port Settings

Viewing and Changing Port Settings 183

10Create a Web Portal authentication rule to control access to the port, or use one that has already been created.

To create a new rule: a Click Create.

b Specify the user glob in the Matching User Glob box. To match on all usernames, leave the wildcards (**) in the box. (For syntax information, see “Access Rules” on page 238.)

To use an existing rule, leave the rule in the list. c Click Next.

dSelect the authentication and accounting method (RADUS server group or local database).

(For information, see “AAA Methods (RADIUS Server Groups and the Local User Database)” on page 240.)

eClick Next.

fTo configure accounting, select Enabled, select the record type (Start-Stop or Stop-Only), then select LOCAL or a RADIUS server group for the accounting and click Add.

gClick Finish.

„If you selected Local as an authentication method, the users in the local database are listed. Go to step 12.

„If you did not select LOCAL, click Finish to close the wizard and save the changes. You are finished with this procedure.

11If you selected Open Access in step 2, select the VLAN to which you want the switch to assign users. Otherwise, go to step 12.

Click Finish to close the wizard and save the changes. You are finished with this procedure.

12Click Next.

If you selected LOCAL as an authentication method, the users in the switch’s local database are listed. For convenience, you can add, modify, or delete users on this page. To add a user, click Create and see “Creating a Named User” on page 289. To modify a user, select the user and click Properties. To delete a user, select the user and click Delete.