3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual „ Wpa

Viewing and Configuring Wireless Services 251

5Select the SSID type from the SSID Type drop-down list:

„Encrypted—Traffic on the SSID is encrypted.

„Clear—Traffic on the SSID is unencrypted.

6Click Next.

„If you selected Encrypted in step 5, configure the encryption settings. Go to step 7.

„If you selected Clear in step 5, go to step 15.

7Select the security modes you want the SSID to support. You can select one or more of the following:

„RSN (WPA2)

„WPA

„Static WEP

8Click Next.

9If you selected RSN or WPA in step 7, you can select whether to use dynamically generated keys, or static keys based on a passphrase.

„To use dynamically generated keys, leave the Pre-shared Key box blank and go to step 10.

„To use static keys, type a string from 8 to 63 characters long in the Pre-shared Key box and click Generate.

10Click Next.

11Select the encryption algorithms to use:

„AES (CCMP)—Usually used with RSN (WPA2)

„TKIP—Usually used with WPA

„WEP-104—Used with dynamic WEP

„WEP-40—Used with dynamic WEP

12Click Next.

13If you selected Static WEP in step 7, specify WEP keys. Otherwise, go to step 14.

„For each key (up to four), type the key value in the corresponding key box.

„By default, data in unicast and multicast packets are encrypted using WEP key 1. To use another key for either type of packet, select the key number in the WEP Unicast Key Index or WEP Multicast Key Index box.