3Com 3CRWXR10095A Viewing the To view the configured MAPs, Configured MAPs, Select Access Points

Viewing and Configuring MAPs 273

Viewing the To view the configured MAPs:

Configured MAPs

1Select the Configuration tool bar option.

2In the Organizer panel, click the plus sign next to the WX switch.

3Click the plus sign next to Wireless.

4Select Access Points.

The MAPs that are configured on the WX switch appear in the Content panel. The radio settings appear in the Content panel. Each row in the table shows settings for an individual MAP.

To display all settings for a MAP, select the MAP and click Properties.

Creating a A MAP can connect to the wired network through a direct 10/100 Distributed MAP Ethernet connection to a WX or indirectly through other Layer 2 or

Layer 3 wired networking devices. Configure a Distributed MAP for each indirectly connected MAP.

Table 20 lists how many MAPs you can configure on a WX switch, and how many MAPs a switch can boot. The numbers are for directly connected and Distributed MAPs combined.

Table 20 Maximum MAPs Supported Per Switch

WX Switch Model	Maximum Configured	Maximum Booted
WX4400	300	40, 80, or 120, depending on
		the license.
WX1200	30	12
WXR100	8	3

For a MAP that is directly connected to the WX, configure a MAP port instead. (For information, see “Configuring a Directly Connected MAP” on page 275.)

To create a distributed MAP

1Access the Create Distributed AP wizard:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. c Click the plus sign next to Wireless.