3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A Scope is always MAP Radio and cannot be changed

Generating a Radio Details Report 395

7To select or change the output directory for the report, click Choose, navigate to the new directory, and click Select.

8To prevent 3WXM from replacing an existing report of the same type with this new report, click next to Overwrite Existing Files to deselect this option.

9Click Generate.

10When the report is generated, click the report link to view it. The RF summary report contains the following sections:

„Cumulative data for the scope of the report

„Detailed data for each WX switch within the scope of the report

Generating a Radio The radio details report lists details about an individual radio.

Details Report

The data for this report comes from 3WXM Services. The Enable RF trending option, located in the RF Monitor group box of the Monitoring Settings tab, must be enabled. (See “Changing Monitoring Settings” on page 500.)

1Select the Reports tool bar option.

2In the Report Category list, select RF Reports.

3In the Reports list, select Radio Details.

4Select the radio for which you want the report.

The scope is always MAP Radio and cannot be changed.

5Select the time period for the report:

„1 Hour

„24 Hours

„7 Days

„30 Days

6To select or change the output directory for the report, click Choose, navigate to the new directory, and click Select.

7To prevent 3WXM from replacing an existing report of the same type with this new report, click next to Overwrite Existing Files to deselect this option.