500 CHAPTER B: CHANGING 3WXM SERVICES PREFERENCES
Changing Monitoring Settings
By default, status monitoring and monitoring of WX notifications is
enabled. Status monitoring supplies data for the Explore and Status
Summary windows of the Monitor tab. SNMP notifications (traps)
generated by WX switches supply data for the Client Monitor, RF
Monitor, and RF Trends windows. Table 63 lists the source of the data for
each window in the Monitor tab and for the Performance Statistics
window.
The monitoring options require SNMP traps to be enabled on the
monitored WX switches and also require 3WXM Services to be
configured as a notification target (trap receiver) for each of the switches.
Table63 Sources of Monitor Data
3WXM Client Display Data Source Default
Event tab 3WXM client, for 3WXM client messages Enabled
3WXM Services, for monitoring service
messages
Enabled
Enable log monitoring option, for WX switch
messages
Enabled
Monitor tab — Explore
window
Status monitoring of WX switches 3WXM
Services
Enabled
Monitor tab — Status
Summary window
Status monitoring of WX switches by 3WXM
Services
Enabled
Monitor tab — Client
Monitor window
Enable client session collection option Disabled
Monitor tab—
RFMo nitor window
Status monitoring of WX switches by 3WXM
Services
(Does not apply to the Activity tab at the
bottom of the window)
Enabled
Monitor tab —
RFTrends window
Collect radio activity traps Disabled
Enable RF trending option Enabled
Rogue Detection tab Enable Rogue Detection option, which
activates polling and uses SNMP traps received
by 3WXM Services from monitored WX
switches
Enabled
Performance
Monitoring window
Statistics data received by 3WXM client directly
from managed WX switches. 3WXM Services
does not provide this data.
Enabled