3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual Viewing and Configuring 802.1X Network Access Rules

Viewing and Configuring 802.1X Network Access Rules 309

„If you specify a RADIUS server group as the first method and a user is denied access by the RADIUS server, no authentication and authorization are attempted with the other methods specified in the list.

„If you specify LOCAL as the first method and a user is not in the local user database on the WX, authentication and authorization are attempted with a RADIUS server group if one is defined in the method list.

The authentication methods you select are also used for authorization.

9Click Next.

10To enable an accounting rule for the SSID, select Enabled.

By default, accounting rules you configure in 3WXM are disabled, which means 3WXM does not add the rules to the switch’s configuration.

11Select one of the following record options:

„Select Start-Stopto specify that records are sent at the start of a session and the end of a session.

„Select Stop-Onlyto specify that records are sent only at the end of a session.

12Select the accounting method(s) in the Available RADIUS Server Groups list and click Add.

The options and processing are the same as those for authentication methods. (See step 8.)

13Click Finish.