3Com 3CRWXR10095A manual Configuring WX, Administrator Access Rules, Select Admin Access Rules

318CHAPTER 8: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

7To enable this accounting rule for the SSID, select Enabled.

By default, accounting rules you configure in 3WXM are disabled, which means 3WXM does not add the rules to the switch’s configuration.

8Select one of the following record options:

„Select Start-Stopto specify that records are sent at the start of a session and the end of a session.

„Select Stop-Onlyto specify that records are sent only at the end of a session.

9Select the accounting method(s) in the Available RADIUS Server Groups list and click Add.

The options and processing are the same as those for authentication methods. (See step 5.)

10Click Finish.

Viewing and	MSS supports administrative access to a WX switch through the serial
Configuring WX	console port or through the network. Connections through the network
Administrator	use Telnet or SSH.
Access Rules	This section assumes that you are familiar with the AAA options for
	administrative access. For detailed information, see the “Configuring
	AAA for Administrative and Local Access” chapter of the Wireless LAN
	Switch and Controller Configuration Guide.

Viewing WX To view WX administrator access rules:

Administrator Access

Rules

1Select the Configuration tool bar option.

2In the Organizer panel, click the plus sign next to the WX switch.

3Click the plus sign next to AAA.

4Select Admin Access Rules.

The configured administrative access rules appear.