3Com 3CRWXR10095A, 3CRWX120695A WXR100 manual Modifying Basic Switch Parameters

Modifying Basic Switch Parameters 171

„Default source IP address used in unsolicited communications such as AAA accounting reports and SNMP notifications

6To enable the switch to be managed by 3WXM, select Managed. Until this option is selected, you cannot deploy the switch configuration you create in 3WXM to the actual switch in the network.

This option also enables the Launch Telnet and Launch Browser options in the Task List panel.

After you select Managed to enable management of the switch by 3WXM, do not change this option unless advised to do so by 3Com Technical Support. If you change a WX switch to an unmanaged state in a network plan, all network operations (polling) stop for that WX switch. If you change back to a managed state, the entire configuration of the switch is replaced with the settings from the network plan, which can result in loss of connectivity to the switch.

7To modify the management interface, select the IP interface and VLAN from the VLAN/IP drop-down list.

8To modify the enable password, edit the string in the Enable Password box.

Use this option when you are creating a new switch in 3WXM. This option modifies the password in the network plan. However, if the switch is already deployed in the network, 3WXM cannot apply configuration changes to the switch unless the enable password in 3WXM matches the enable password already configured on the switch.

9To change the switch’s Mobility Domain membership, select the Mobility Domain from the Mobility Domain drop-down list.

To leave the switch out of all Mobility Domains, select Not Assigned.

10To change the switch’s wiring closet membership, select the closet from the Wiring Closet drop-down list.

To leave the switch out of all wiring closets, select Not Assigned.

11Click Save.