74CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM

Creating or

To create or modify a building in a site:

Modifying

 

Buildings in a Site

 

1Select the RF Planning tool bar option.

2In the Organizer panel, click the site name.

3Do one of the following:

„If you are creating a new building, click on the site name in the Organizer panel and select Create Building in the Task List panel. A series of dialog boxes prompts you for information about the new building.

„If you are modifying an existing building, select the building name in the Content panel for the site, then click Properties. A dialog box allows you to edit the building’s properties.

„In the Organizer panel, click on the plus sign next to the site name to expand it, then click on the name of the building you want to modify. Information about the building appears in the Content panel. You can edit the building information in the Content panel.

The following figure illustrates the information displayed in the Content panel for a building. Note that this information is the same as the information that appears when you click the Properties button for the building.

Page 74
Image 74
3Com WX4400 3CRWX440095A WX1200, 3CRWXR10095A, 3CRWX120695A WXR100 manual Modifying Buildings in a Site