gis

16 Warranty (certificate)

 

 

To register your warranty, you should complete and return the enclosed

 

 

warranty card after which a warranty certificate will be sent to you. This

 

 

certificate gives the owner of a appliance supplied by A.O. Smith water Products

 

 

Company B.V. of Veldhoven, The Netherlands (hereinafter "A.O. Smith") the

 

 

right to the warranty set out below, defining the commitments of A.O. Smith to

 

 

the owner.

16.1

General warranty

If within one year of the original installation date of a water heater supplied by

 

 

A.O. Smith, following verification, and at the sole discretion of A.O. Smith, a

 

 

section or part (with exclusion of the tank) proves to be defective or fails to

 

 

function correctly due to manufacturing and/or material defects, then A.O. Smith

 

 

shall repair or replace this section or part.

16.2

Tank warranty

If within 3 years of the original installation date of a water heater supplied by

 

 

A.O. Smith, following inspection, and at the sole discretion of A.O. Smith, the

 

 

glass-lined steel tank proves to be leaking due to rust or corrosion occurring on

 

 

the water side, then A.O. Smith shall offer to replace the defective water heater

with an entirely new water heater of equivalent size and quality. The warranty period given on the replacement water heater shall be equal to the remaining warranty period of the original water heater that was supplied. Notwithstanding that stated earlier in this article, in the event that unfiltered or softened water is used, or allowed to stand in the water heater, the warranty shall be reduced to one year from the original installation date.

16.3Conditions for Installation and use

The warranty set out in article 1 and 2 will apply solely under the following conditions:

a.The water heater is installed under strict adherence to A.O. Smith installation instructions for the specific model, and the relevant government and local authority installation and building codes, rules and regulations in force at the time of installation.

b.The water heater remains installed at the original site of installation.

c.The appliance is exclusively used with drinking water, which at all times can freely circulate (a separately installed heat exchanger is mandatory for heating salt water or corrosive water).

d.The tank is safeguarded against harmful scaling and lime buildup by means of periodic maintenance.

e.The water temperatures in the heater do not exceed the maximum setting of the thermostats, which form a part of the water heater.

f.The water pressure and/or heat load do not exceed the maximum values stated on the water heater rating plate.

g.The water heater is installed in a non-corrosive atmosphere or environment.

h.The water heater is connected to a protected cold supply arrangement, which is: approved by the relevant authority; with sufficient capacity for this purpose; supplying a pressure no greater than the working pressure stated on the water heater; and where applicable by a likewise approved temperature and pressure relief valve, fitted in accordance with installation instructions of A.O. Smith applying to the specific model of water heater, and further in compliance with the government and local authority installation and building codes, rules and regulations.

Instruction manual BFC

87

Page 87
Image 87
A.O. Smith BFC - 80, BFC -100 Warranty certificate, General warranty, Tank warranty, Conditions for Installation and use

BFC - 80, BFC -100 specifications

A.O. Smith is a renowned name in the water heater industry, and its BFC series, which includes the BFC-100 and BFC-80 models, exemplifies their commitment to innovation and efficiency. These units are designed to meet the demanding needs of both residential and commercial applications, providing reliable hot water solutions.

The A.O. Smith BFC-100 and BFC-80 are distinguished by their high capacity and robust design. The BFC-100 model boasts a capacity of 100 gallons, while the BFC-80 is ideal for those requiring 80 gallons. This makes them suitable for larger households or commercial establishments where hot water demand can be significant.

One of the primary features of these models is their advanced heating technology. Both units utilize a high-efficiency burner that ensures rapid heating and minimal energy consumption. This means users benefit from shorter wait times for hot water, reducing overall energy costs. The BFC series is also equipped with a special flame retention head that enhances combustion efficiency and prolongs the lifespan of the unit.

In terms of construction, the BFC-100 and BFC-80 models are built with high-quality materials that enhance durability and resistance to corrosion. The tanks are insulated with high-density foam, which improves energy retention and helps maintain water temperature for longer periods. This is crucial for conserving energy and minimizing heating costs.

Safety is a top priority for A.O. Smith, and the BFC series reflects this commitment. Each unit comes with a range of safety features, including a temperature and pressure relief valve that prevents overheating and excessive pressure buildup. Additionally, they are designed to meet strict industry standards, ensuring peace of mind for users.

Installation of both models is straightforward, with flexible venting options that accommodate various building layouts. Whether you are upgrading an existing water heating system or installing a new one, the BFC series is designed to integrate seamlessly.

In summary, the A.O. Smith BFC-100 and BFC-80 are excellent options for those seeking reliable, efficient, and durable water heating solutions. With their impressive capacity, advanced heating technology, robust construction, and safety features, these models stand out in the market and are sure to meet the hot water needs of any household or commercial space. Whether for residential use or in a business setting, A.O. Smith’s BFC series represents quality and innovation in hot water heating.