Answering System Features
48 For assistance, please call 1-800-211-PANA (7262).
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance will start.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1Dial your phone number.
2Let the phone ring 15 times.
LThe unit will answer your call with the
greeting message.
LYou can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 47).
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number, then press {*} to skip the
greeting message and record your
message after the beep.
Answering system settings

Remote code

A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
Store any 2-digit number (00–99). The
default setting is “11”.
1Press {MENU}.
2Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3Scroll to “Set answering” by pressing
{V} or {^}, then press {>}.
4Scroll to “Remote code” by pressing
{V} or {^}, then press {>}.
5Select the desired remote code by
entering a 2-digit number (00–99).
6Press {Save}, then press {OFF}.
Note:
LTo confirm the remote code, repeat
steps 1 to 4. Press {OFF} when finished.
TG2431_2432(e).book Page 48 Thursday, February 3, 2005 5:01 PM