Vehicle Installation
to select the FM channel..
vi..Start Using is highlighted.. Press the Select button..
vii.The FM channel you selected will be confirmed on the display screen.. The onyX will tune to the FM channel..
9You should hear XM channel 1 through your vehicle’s FM radio.. If you are satisfied with the sound quality, you’re done! You are now ready to activate your onyX..
10If the selected FM channel doesn’t work well for you, work down the list of FM channels until you find one that allows you to hear XM clearly.. Each time, you will need to tune your vehicle’s FM radio to the FM channel and then set your onyX to transmit on the same FM channel (steps 7 & 8)..
| FM Channels |
FM 1 | 97.9 current |
FM 2 | _ _ _ |
FM 3 | _ _ _ |
FM 4 | _ _ _ |
FM 5 | _ _ _ |
|
|
99.3 FM
Set your vehicle radio to the above channel to enable audio.
in your area (step 5).. Verify that nothing is plugged into the AUDIO connector on the PowerConnect Vehicle Dock.. Refer to “Troubleshooting” on page 102 for additional help..
Option 4: FM Direct Adapter (FMDA) Installation
The FMDA needs to be installed by a professional installer.. Professional installation can help improve your radio’s reception and significantly reduce the visibility of wires.. To learn more, check with the retailer where you bought your radio, or go to xmradio..ca/accessories..
If the signal reception is good, but there is no XM audio when tuned to channel 1, verify that both the onyX and your vehicle’s FM radio are tuned to the same FM channel (steps 7 & 8).. Also ensure the chosen FM channel is a suitable one to use
46 | 47 |
