Olicom A400A manual Connect the local devices, Connect the adapter, Install a telephone filter

a.Plug the RJ-14 end of console cable into the CONSOLE port on the router back panel.

b.Connect the other DB-9 end of console cable to a serial port (COM1 or COM2) of your computer.

Connect the local devices

1.Insert one end of a ethernet cable into the ports labeled LAN port on the rear panel of router until you hear click.

2.Connect the other end of the cable to the ethernet port on a personal computer or other networked device.

3.If you require more than one hub port, you can connect the router to another hub.

Connect the adapter

Plug the adapter connector into the socket labeled DC IN on the back of the router and connect the other end into a properly wall outlet.

Note: 1. The power rating of the adapter is "Input: 220V 50Hz, Output: 9Vdc 1.1A".

2.There is no power switch on this router. The power is on as long as the router is plugged in.

Install a telephone filter

Converting your regular phone line into a high-speed Digital Subscriber Line (DSL) can cause audible noise (high-pitched tones and static) when you talk on the phone. You need to install a filter on each telephone or device that shares the DSL Line to eliminate this noise.

Place on filter in every telephone jack that is directly connected to a telephone, answering machine, fax or any other phone line device. Unused jacks do not need a filter.

7