Olicom A400A manual RFC 1483 bridge EoA

RFC 1483 bridge (EoA)

Bridged protocol data unit is encapsulated using RFC 1483 protocol over an ATM network and this operation mode using ATM/ADSL to execute as a Ethernet's bridge.

1.VPI: Enter the number of the virtual path identifier in the VPI field.

The VPI is a number in the range 0-255. Consult your ATM transport administrator for what number you should enter in this field.

2.VCI: Enter the number of the virtual circuit identifier in the VCI field.

The VCI is a number in the range 0-65534. Consult your ATM transport administrator for what number you should enter in this field.

3.Encapsulate: Select the encapsulation setting.

You choose LLC or VC Mux to configure whether the virtual circuit uses LLC-SNAP encapsulation or Vc-based multiplexing.

4.Gateway: Use the Gateway Address field to specify the IP address of the default IP gateway.

5.Remote DNS: Enter the IP address of your domain name server in the Remote DNS field.

A domain name server is a network computer responsible for matching host names to numeric IP addresses so that network traffic can be routed correctly. Your Internet Service Provider can provide the IP address of its domain name server.

15