Olicom A400A manual

Options are : Serial port, Network

ŠSerial port :You can use the attached console cable to connect the router and a personal computer to configure, administer and monitor your ADSL router with Graphic User Interface (GUI).

a)Plug the RJ-14 end of console cable into the CONSOLE port on the router back panel.

b)Connect the other DB-9 end of console cable to a serial port (COM1 or COM2) of your computer.

ŠNetwork: Or you can open a Network connection from a workstation on your network. You must know the IP address of the router before you can make a Network connection to it. By default , the router uses 192.168.1.1 as the IP address for its LAN interface. You can use the Graphic User Interface (GUI) to configure the router IP address.

ŠRetry interval: Enter the timing of how many seconds you want to reconnect the router if failure. (The default is 3 seconds.)

10