Vehicle Installation
display screen that denotes antenna signal strength.. You can also press menu and then press 
to scroll to and highlight Signal Indicator.. Press the Select button.. The Satellite and Terrestrial bars show the strength of the signal being received.. If the signal reception is good, press and hold menu to return to the main display screen..
Signal Indicator
SATELLITE
TERRESTRIAL
Option 3: PowerConnect Installation Instructions
1Insert the dock into the mount..
2Insert your onyX into the dock..
3 Power on your onyX by pressing the Power button..
menu
|
|
|
|
|
|
|
|
|
| FM |
1 | 2 | 3 | 4 |
|
|
|
|
|
| jump |
| 5 | 6 |
|
|
|
|
| |||
|
|
|
|
| 7 | 8 | 9 | 0 |
| |
|
|
|
|
|
|
|
|
| direct |
7Ensure onyX is tuned to channel 1..
Upon power up, onyX should tune to channel 1 by default, when it’s not yet activated.. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 55 to learn about how to tune a channel..
8If you haven’t done so, turn on your vehicle’s stereo system.. Set it to play input from the cassette source..
9You should hear XM channel 1 through your vehicle’s stereo system.. You are now ready to activate your onyX..
10The audio level output of the onyX can be increased or decreased as necessary to match the audio levels of other sources in your vehicle.. Refer to “Set Audio Level” on page 89..
If the signal reception is good, but there is no audio when tuned to channel 1, be sure the vehicle’s stereo system is set to the correct source, i..e.., cassette source (step 8).. Also be sure that the audio level is set high enough to be heard (step 10).. Refer to “Troubleshooting” on page 102 for additional help..
4Be sure the vehicle is outside and the antenna has a clear view of the sky.. Verify that you are receiving the XM signal.. There should at least be one bar on the lower left corner of the main display screen that denotes antenna signal strength.. You can also press menu and then press 
to scroll to and highlight Signal Indicator.. Press the Select
button.. The Satellite and
Terrestrial bars show the strength of the signal being received.. If the signal reception is good, press and hold menu to return to the main display screen.. You are ready to make the audio connection..
menu
FM
42 | 43 |
