the shorter one for the original cash drawer “CR1” and use the longer one for the extended cash drawer “CR2” that will be distinguished by the software command. In this way, the TP6000 is capable of controlling two cash drawers independently through software command.
WALL MOUNTING
The major part in the wall mounting kit is a bracket as shown in the picture. Screw the bracket against the wall for mounting the TP6000 series in the direction that the wider parts of the matching holes are at the top as shown in the picture. Align the four matching pegs on the back of the main unit with the four matching holes in the bracket to hold the main unit in the similar manner as installing the main unit onto the paddle assembly. The paddle assembly is not engaged in wall mount operation.
Matching Holes
Wall Mount Bracket
Screw At Screw Holes Through Matching Holes
LOCATION FOR INSTALLATION
As the paddle assembly is not involved in wall mount installation, the space required for wall mount application will take only the main unit into consideration. So the space required is 375 mm in width and 315 mm in height.
For desk top/counter application, the adjustable paddle assembly requires a base of 270 mm deep and 260 mm wide. However, please take also the main unit into consideration. If the main unit is tilted to near vertical position, the total height can be
TP6000 USER’S MANUAL 4 - 7
