Configuring Your onyX
Using the Vehicle Dock From the Universal Xpress Car Kit
TIP! The FM Transmitter must be Off.. To verify that the FM Transmitter is Off, refer to “Turn FM Transmitter On/Off” on page 98 ..
If you have chosen to use the Vehicle Dock from the Universal Xpress Car Kit rather than the PowerConnect Vehicle Dock included with your onyX radio, you will need to complete some additional installation steps.. When you have completed these additional steps, you can continue with the installation of your onyX..
When you are using the Universal Xpress Vehicle Dock, the screen will initially display “AUX Connected” when you power on your onyX.. Ignore this message.. Once you have completed the steps below, it will not be displayed again..
If you are connecting the audio using PowerConnect (or FMDA):
AUX Connected
Audio enabled through auxiliary line. FM turned OFF.
2Continue with the installation..
1Disable the AUX Detect feature.. Refer to “AUX Detect” on page 91, and disable AUX Detect..
2Turn the FM Transmitter in the onyX On.. Refer to “Turn FM Transmitter On/Off” on page 98, and turn the FM Transmitter On..
3Continue with the installation..
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1Disable the AUX Detect feature.. Refer to “AUX Detect” on page 91 , and disable AUX Detect..
96 | 97 |
