Genesis Control Programming Instructions
7.Oven will automatically begin to heat at selected start time.
∙OVEN ON light will turn on when oven begins to heat.
∙To adjust cook time, press COOK/CLEAN TIME pad twice while the remaining cook time is displayed. Cook time can then be adjusted.
∙When cooking time has elapsed an end of cycle signal sounds and END will be displayed. Oven signal sounds 4 times, then once every 10 seconds until oven control knob is turned to OFF. Knob must be turned to OFF for oven to stop shut off.
8.Turn knob to OFF to cancel baking.
Self-Cleaning
1.Prepare oven for
2.Close door.
3.Push and turn oven temperature knob to CLEAN position.
∙The default
4.Set cycle length for
∙Use slew pads to adjust time as necessary before oven indicator light turns on.
∙Clean cycle can be set from two to four hours in five minute increments.
∙Default setting for the cycle is three hours.
5.
∙OVEN ON indicator light will be on and will remain on until the end of the cycle.
∙At the end of the
∙At the end of the
∙The LOCKED indicator light will remain on until oven reaches a cooler temperature. LOCKED light will flash while door is unlocking, and then shut off when door has unlocked. Oven cavity will be hot to the touch.
∙DO NOT attempt to open door prior to LOCKED indicator light shutting off. When oven is cool, turn oven knob to OFF.
Interrupting the self-clean cycle
To stop a
1.Turn oven temperature knob to OFF position.
2.When oven has cooled to a lower temperature, LOCKED light turns off. Door can be unlocked.
∙DO NOT force door. This can cause damage to the latch.
Delayed Self-clean Cycle
1.Prepare oven for
2.Close door.
3.Press START COOK/CLEAN pad.
4.Set starting time for the cleaning cycle.
∙Default time is current time of day.
∙Start time can be set from current time to current time plus 11 hours and 59 minutes.
5.Turn oven temperature knob to CLEAN.
∙Default
6.Set cycle length for
∙Use slew pads to adjust time as necessary.
∙Clean cycle can be set from two to four hours in five minute increments.
∙Default setting for the cycle is three hours.
7.
∙Oven cannot be used until completion of the
∙
∙To view start time, press the START COOK/CLEAN pad.
∙OVEN ON indicator light will turn on when the
∙To view the clean cycle time, press the COOK/CLEAN TIME pad.
∙At the end of the
∙The LOCKED indicator light will remain on until oven reaches a cooler temperature. LOCKED light will flash while door is unlocking, and then shut off when door has unlocked. Oven cavity will be hot to the touch.
∙DO NOT attempt to open door prior to LOCKED indicator light shutting off. Once oven is cool, turn oven knob to OFF position.
Interrupting the
To stop a
1.Turn oven temperature knob to OFF position.
2.When oven has cooled to a lower temperature, LOCKED light shuts off. Door can be unlocked.
∙DO NOT force door. This can cause damage to the latch.
RS2320006 Rev. 0 | C−4 |