Disassembly Procedures
! WARNING | To avoid risk of electrical shock, personal injury or death; |
disconnect power supply source before servicing, unless | |
| testing requires it. |
|
|
Storage Drawer Removal | Removing and Replacing Range |
1.Pull drawer out until it stops.
2.Grasp drawer sides near back of drawer and lift up and out.
3.Reverse procedure to reinstall storage drawer.
1.Disconnect power to range.
2.Slide range forward on slide guards.
NOTE: Usage of slide guards, prevents the unit from damaging the floor.
3.Unplug range cord and place range aside.
4.Remove
5.Install
6.To reinstall range, follow instructions in Installation section of this manual.
Storage Drawer Tracks
1.Remove storage drawer from unit.
2.Remove bolt and nut securing track to the chassis (located in the front of the unit).
3.Slide track backwards and then forward to remove track.
Power Cord
1.Slide unit outward to gain access to power cord.
2.Unplug power cord from receptacle.
3.Remove screw securing power cord to unit chassis.
4.Disconnect power cord.
5.Reverse procedure to reassemble.
NOTE: Power cord NOT supplied with unit.
15 | RS2320006 Rev. 0 |