Amana RS2320006 Questions?, Position And Level Range, Removal and Replacement of Range

3POSITION AND LEVEL RANGE

Place range near final position and plug in. Then, slide range into final position and adjust all legs (4) until range is level side to side and front to back.

•Place a level on top oven rack or on range top when leveling.

•Leveling legs must extend ¼" to engage anti-tip bracket.

Remove

Storage

Drawer and

Check Anti-tip

Bracket

After range is in position, remove storage drawer or lower panel and confirm anti-tip bracket is engaged with range leveling leg.

To remove storage drawer

1.Slide drawer out until it stops.

2.Grasp drawer sides near back of drawer.

3.Lift up and out. Reverse to reinstall.

To avoid damaging oven door, do not lift or move range by oven door handle. Glass can break.

Removal and Replacement of Range

1.Disconnect power to range.

2.Slide range forward.

3.Unplug range cord and place range aside.

4.Remove anti-tip bracket.

5.Install anti-tip bracket into new location using instructions provided with bracket or see Anti-tip Bracket installation section in this manual.

6.To reinstall range, follow instructions in this manual.

Questions?

See Owner’s Manual or call Amana Consumer Affairs Department 1-800-843-0304

RS2320006 Rev. 0 A–4