Patton electronic 1092A Snmp Management Solutions, HTTP/HTML Management, Configuration

2.3 1092A SNMP MANAGEMENT SOLUTIONS

Model 1092A is SNMP manageable when it is connected to a rack-mounted Model 1092ARC . SNMP management is enabled through a 1001MC rack management card located in the Patton Electronics Rack System.

2.3.1 HTTP/HTML Management

The 1001MC maintains HTML pages that can be viewed through a web browser. You can display remote statistics and configure Model 1092A parameters simply by entering the 1001MC’s IP address into the browser

10Base-T	2B1Q
Connection	Connections to
to 1001MC	Remote 1092As

Mgt

Station

Rack-Mounted

1092ARCs

Figure 1. Typical Application of the 1092A

3.0 CONFIGURATION

The Model 1092A is equipped with two sets of eight DIP switches, which allow configuration of the unit to a wide variety of applications. This section describes switch locations and explains all possible configurations.

3.1 CONFIGURING THE HARDWARE DIP SWITCHES

The Model 1092A uses a unique set of 16 external mini DIP switches that allow configuration to a wide range of applications. The 16 external switches are grouped into two eight-switch sets, and are externally accessible from the underside of the Model 1092A (See Figure 2).

		S2
	ON
Back		Front
	OFF
		S1

Figure 2. Underside of Model 1092A, Showing Location of DIP Switches

The two sets of DIP switches on the underside of the Model 1092A will be referred to as S1 and S2. As Figure 3 shows the orientation of all DIP switches is the same with respect to “ON” and “OFF” positions.

ON

OFF

Figure 3. Close Up of Configuration Switches (both sets are identical in appearance)

5

6