ADIC FileServ Version 4.0 600716 Rev A Run the fsmodclass command and specify a, Specify oldclass

AdministrativeTasks

Rename Group with fsclassrnm Command

Step 1.	Run the fsmodclass command and specify a
	DataClass group name.
	% fsmodclass prodclass -n joe
Step 2.
	Use fsclassinfo to compare each DataClass
	group parameter. Then either change the class
	parameters for the new class to allow spanning or
	change the class parameters for the old class to
	disallow spanning.
	- Specify oldclass.
	- Specify newclass (newclass name cannot be the
	same as oldclass name). The directories
	associated with oldclass become associated with
	newclass, and oldclass is deleted.
	% fsclassrnm prodclass iradclass

The fsclassrnm operation allows the name of a DataClass group to be changed.

Note

For more information on the fsclassrnm command, refer to the Command Reference book.

All files and media associated with the previous DataClass group still exist in the new DataClass group. If the new specified DataClass group already exists, the previous DataClass group is merged into the new DataClass group. No restrictions exist when merging two DataClass groups. If two DataClass groups use different media types, the merge still occurs.

2-6 Operating Tasks 600716 Rev A