ADIC FileServ Version 4.0 600716 Rev A manual Media Stats, Logging Parameters

Administrative Tasks

Media Stats	The following list shows parameters that can be modified as
Parameters	required, to collect media statistic information for each site.
	FileServ must be cycled to pick up changes to these parameters.
Parameter		Default			Definition
TSC_LOG_MASK		e			Enables or disables various priorities of the tape
					statistic logging. The following values can be used
					in any combination:
					• e = error priority (always logged)
					• h = history priority
Logging Parameters	The following list shows parameters that can be modified, as
	required, to choose logging levels for each site. FileServ must
	be cycled for to affect changes. These parameters are used for
	trace logging.
	If trace logging is enabled through the FSLOG_OPTIONS
	parameter, logs are sent to the trace log files. If trace logging is
	disabled, then all trace-level logs are discarded.
Parameter	Default				Definition
FSLOG_OPTIONS		e		Enable the trace logging facility to the
				/FS_HOME/syslog/trace directories.
				• e = enable trace logging.
				• - = no trace information is logged.
FS_LOG_LEVEL	YYYYYYYYY		Controls which dynamic technical support logs are
				sent to the fs_ATAC_11 file.
				• NNNNNNNN = OFF levels 12-20
				• YYYYYYYY = ON levels 12-20

1-44 System Tasks 600716 Rev A