ADIC FileServ Version 4.0 600716 Rev A manual To create a DataClass group, follow the steps below

AdministrativeTasks

Modify Group with fsmodclass Command

Note

All GUI class operations are run from ADMIN-> Define Class ->Create Groups or with the fsaddclass command.

To create a DataClass group, follow the steps below.

Tip

A DataClass group must be defined before directories can be associated with it.

Step 1. To verify the parameter settings before attempting any modification, use the fsclassinfo command to view the DataClass group parameters.

Step 2. Run the fsaddclass command and specify a DataClass group name.

% fsaddclass prodclass

Step 3. Use other appropriate options, as needed. For option information, refer to the Command Reference book.

The fsmodclass command modifies DataClass group parameters.

Note

For more information on the fsmodclass command, refer to the Command Reference book.

Operaitng Tasks

600716 Rev A Operating Tasks 2-5