ADIC FileServ Version 4.0 600716 Rev A manual Fsrollup production

AdministrativeTasks

Roll Down DataClass Groups

Step 3. Specify the name of the directory to be rolled up to (the new association point).

%fsrollup production

Note

All subordinate directories of directory must be in the same DataClass group. The directory specified in directory can only contain subordinate directories and no other files

The DataClass association point directory level is changed using the fsrolldown command.

Note

For more information on the fsrolldown command, refer to the Command Reference book.

Operaitng Tasks

A directory at the association point of the DataClass group is excluded from the DataClass group by specifying it in the fsrolldown command. This causes each subdirectory of that directory to become an association point for the DataClass group. The specified directory no longer maintains a directory-to-DataClass relationship and, therefore, is a nonmigration directory. The specified directory contains only subordinate directories and no other files. When rolling down a directory, files must be moved into directories before the command is invoked. It is preferable to perform this adjustment before many files are stored to the directories.

The association is only rolled down to an association point for each directory under the original association point. The Roll Down operation is performed on only one hierarchical directory level at a time.

600716 Rev A Operating Tasks 2-19