ADIC FileServ Version 4.0 600716 Rev A manual Maxtapetotapeallocti

Administrative Tasks

Parameter	Default	Definition
STARVATION_PERCENT	50	Percent of
		MAX_TAPE_TO_TAPE_ALLOC_TI
		ME variable in which resources will
		be obtained and not released until
		all resources have been secured or
		the time limit has been exceeded.
		(Valid range is 1 through 100.)
FS_NICE_VALUE	n	If enabled, the FileServ process and
		database resident process runs with
		this n value. Refer to set priority (2)
		for the value range of the system.
		To enable, enter a value.
		To disable, set the value to “0.”
FS_VS_QUEUE_XXX	variable	Storage request threshold value
_THRESHOLD		when surpassed, resource requests
		are queued in the FileServ system
		instead of the VolServ system. The
		Value is 3x the number of drives
		located in the system. For each
		media type, there is a separate entry
		required, e.g.,
		FS_VS_QUEUE_D2S_THRESHOLD. If
		the value is changed, it is
		recommended that the sum of all
		FS_VS_QUEUE_xxx_THRES-
		HOLD values not exceed 100.
FS_THRESHOLD_INC_NUM	5	Threshold increment number
		variable. The value for the drive
		failure level when an access to a
		drive fails.
FS_THRESHOLD_DEC_NUM	1	Threshold decrement number
		variable. The value for the drive
		failure level when an access to a
		drive is successful.

1-34 System Tasks 600716 Rev A