ADIC FileServ Version 4.0 600716 Rev A manual Dbcheck

Administrative Tasks

FileServ and Amass If FileServ and AMASS are on the same platform, the FileServ

Autostartprocesses must be started before the AMASS processes. If the autostart scripts are enabled for both FileServ and AMASS, the FileServ autostart script must be executed before the AMASS autostart script.

Assign a name to the FileServ autostart script so that it will start before the AMASS autostart script. An example of the FileServ and AMASS autostart script names int /etc/rx2.d directory is shown below:

lrwxrwxr-x 1 root sys 25 Jan 16 08:58 S95FileServ ->\ /etc/init.d/auto_FileServ

lrwxrwxr-x 1 root sys 25 Jan 16 08:58 S99amass ->\ /etc/init.d/amass

dbcheck	The dbcheck utility checks the consistency of a database by
	validating the location and key values associated with each
	record and key in the data and key files.
	Note
	Run the dbcheck utility only when FileServ is not running.
	ADIC recommends that you run this utility on a regular basis.
	Database inconsistencies will be reported with a message
	describing the nature of the error and the database address of
	the record involved.
	This utility is located in the $FS_HOME/util directory.
	Options are described in the table below:

Option

Description

-s

Enables the checking of set consistency.

3-4 Utilities 600716 Rev A