ADIC FileServ Version 4.0 600716 Rev A manual Command Line, Mode

Administrative Tasks

		First, you check the devdb table for the entry
		containing /test2. Notice there is a field called
		“device key” associated with /test2. This is the
		value you will use for device specific table utilities
		that are associated with the /test2 file system.
	Step 3.	To look at the fileattr entries for the files on
		/test2 and to send the output to a file called
		test2.files, enter the following command:
		# fileattr 4 -ftest2.files
		Examine the file at your leisure.
Command Line	Command line mode queries only the specified table. In most
Mode	cases you need to enter only the utility name to call the query.
	The utility queries the database for all records in that specific
	table. The results appear on the screen, or you can redirect the
	results to a file using the standard UNIX redirection command.
	Options for most of the utilities are listed below:
	Option		Description
	-ffilename		Send all output to the specified filename.
	Note: Do not put
	a space between
	the -fand the
	filename.
	-h		Display a help screen
	-i		Run in interactive mode

1-16 System Tasks 600716 Rev A