Administrative Tasks

Software

The following list shows parameters that can be modified as

Maintenance

required for software maintenance. FileServ must be cycled to

Parameters

affect the changes. These parameters are used to enable and

 

 

disable different types of message logging. These logs can be

 

 

used for debugging purposes. To enable logging, remove the

 

 

comment line indicators from the parameter(s) and recycle

 

 

FileServ.

 

 

 

 

 

 

 

 

 

 

 

Parameter

 

 

Default

Definition

 

 

 

 

 

 

 

COMMAND_LOGGING

 

 

y

Enables logging of user commands and status

 

 

 

 

 

 

to the fs_hist_21 file.

 

 

 

 

 

 

 

COMMAND_INFO_DETAIL

 

 

y

Removes the message number, priority, and

 

 

 

 

 

 

request identifier from the status returned to

 

 

 

 

 

 

the user.

 

 

 

 

 

 

COMMAND_EXTRACT_HEADER

 

n

If enabled, removes the message number,

 

 

 

 

 

 

priority, and request ID from the command

 

 

 

 

 

 

status back to the user. Does not effect

 

 

 

 

 

 

logging.

 

 

 

 

 

 

 

FS_TRACE_MASK

 

 

o

Controls generations of trace logs to the

 

 

 

 

 

 

/FS_HOME/tracelogs directories. Set Mask

 

 

 

 

 

 

according to which trace logs generate. Use

 

 

 

 

 

 

individually or in combination.

 

 

 

 

 

 

• k = KRPC messages

 

 

 

 

 

 

• i = IPC messages

 

 

 

 

 

 

• o = no trace logging performed

 

 

 

 

 

 

 

FS_TRACE_SIZE

 

 

8192

Record size limit (in bytes) for recording in the

 

 

 

 

 

 

trace logs.

 

 

 

 

 

 

 

 

System Tasks

600716 Rev A

System Tasks

1-43

Page 59
Image 59
ADIC FileServ Version 4.0 600716 Rev A manual Software, Maintenance