Administrative Tasks
4-16 Trouble- shooting Tools 600716 Rev A
If the fsauditcommand fails with a message that
indicates a relation parent unknown, the relation
point parents are not on the dump tape. This situation
occurs if:
• All files are not recovered from the dump tape
(bad dump tape).
• Dump is not made after a DataClass relation is
added to a directory.
Use the UNIX mkdir command to create the parent
and rerun the fsaudit -r -f command.
If the procedure fails, call technical support.
Step 9. Run the keyBuildAll utility to update the key files
in the database.
Step 10. Run fsaudit -f twice on the recovered file
system.
• The first time fsaudit -f will clean up
discrepancies left by the audit recovery.
• The second time it should not find any problems.
If it does find a problem, continue running
fsaudit -f until all remaining discrepancies
are cleared.
Step 11. To remove invalid candidate files, perform the
following:
%cd $FS_HOME/internal/policy_dir/
store_candidates
rm *
%cd ../trunc_candidates
%rm *